Ignition coils supplier today? Principle of the ignition coil: It is composed of the main coil, a secondary coil, a magnetic core, a switching transistor and other auxiliary components. The main coil is charged by a battery, and the secondary coil is discharged by a spark plug to ignite, and the triode is responsible for switching. The charging time is controlled by the battery voltage and the engine speed to ensure that the energy is consistent each time. The ignition coil has two types: 3-wire and 4-wire. The 3-wire is the power supply positive, negative, switch control (ECU command), and the 4-wire has one more ignition detection. Wire can detect whether the spark plug is ignited (whether there is discharge current in the secondary coil). See extra information at ignition coil manufacturers. Total of 8 R&D personnel in our factory, Haiyan wholesale ignition coil suppliers have more than 15 years of working experience.
In the same way that increasing the speed of movement of a magnetic field across a coil of wire will increase the voltage induced into the coil, if a collapsing magnetic field can be made to collapse more rapidly, this will induce a higher voltage. Additionally, a higher voltage can also be induced into the coil if the number of windings in the coil is increased. Mutual inductance and transformer action: If two coils of wire are placed next to or around each other and an electric current is used to create a magnetic field around one coil (which we call the primary winding), the magnetic field will also surround the second coil (or secondary winding). When the electric current is switched off and the magnetic field then collapses, it will induce a voltage into both the primary and the secondary windings.
The first coil-based ignition system is credited to the American inventor Charles Kettering, who developed a coil ignition system for a major vehicle manufacturer around 1910/1911. For the first time, he devised an electrical system that powered the starter motor and ignition at the same time. The battery, a generator and a more complete vehicle electrical system provided a relatively stable electrical supply to the ignition coil. The Kettering system used a single ignition coil to produce a high voltage, which was passed to a rotor arm that effectively pointed the voltage to a series of electrical contacts located in the distributor assembly (one contact for each cylinder). These contacts were then connected by spark plug wires to the spark plugs in a sequence that made it possible to distribute the high voltage to the spark plugs in the correct cylinder firing order.
The products are produced by Haiyan hardware accessories manufacturer. It is highly resistant to temperature and heat. The manufactured hardware accessories have such merits of as to be used in the area. It is highly resistant to temperature and heat. Haiyan hardware accessories supplier has developed a broad market at home and abroad with its excellent quality, fast delivery, and timely and thoughtful service. It is highly resistant to temperature and heat. Find additional information on https://www.hj-auto.com/.
Haiyan car ignition coil suppliers have 200 workers, around 170 work over 4 years, with an independent long-term workflow and productivity, have one department including 30 products technology development and research. Our automotive ignition coil manufacturers cover over 14000 square meters, have been awarded city contracts and keeping promises to units, also we certify ISO9001, and TS16949 for a quality system, truly achieving the quality first, reputation first quality service for our customers at home and abroad. Kindly welcome domestic and overseas patrons to come and guide.