Bushing factory today? A single car has about 30,000 parts, counting every part down to the smallest screws. Many different parts have different functions and performance. Some of the most important automobile components include the engine, gearbox parts, drive axle, steering and suspension, brakes, and so forth. Each and every component of an automobile has significance. GJ BUSH is willing to help their customers to develop or source more autoparts, with OEM attitude. Discover more details at rubber bushes manufacturers.
A variety of natural rubber and heat resistant materials can be used to meet customer requirements. The rubber formula can be customized for low dynamic stiffness, best balancing characteristics in all directions and high durability. The product ranges from conventional, hydro, through exhaust mounting, top mounting, gearbox mounting and sub-frame mounts to conventional mounts.
In general, the smaller the stiffness of the exhaust support, the better the filter-ability against vibration, but the amount of deformation will also increase at the same time, so that the dynamic gap between the exhaust system and the surrounding components becomes smaller. With the gradual improvement in performance and stricter emission standards, the pursuit of economical and lightweight components can also make the design of exhaust pipe lugs more and more difficult.
Axle bushing is the cushioning between joints in a car’ s suspension system. The bushes are designed to absorb the shocks of going over bumps and divots in the road, so they reduce over time. Made of a variety of materials from rubber to polyurethane and aluminum, bushings not only provide a smooth ride, they also deliver better handling characteristics and straight-line acceleration speed when used on a rear suspension.
A greater degree of ride comfort is achieved by effectively isolating the engine noise and vibration from the chassis and driver’s cab. Car engine mounts, which consists of metal and rubber, carries the engine, dampens vibrations and absorbs large engine forces that occur during acceleration and deceleration. The engine block is suspended in these rubbers. The rubber must be of excellent quality and have the right balance in hardness.GJ Bush engine mounts are manufactured from the high-quality steel in combination with the best quality rubber. We are a leading engine mount manufacturer since 1998. This gives the engine some play and the movements are hardly noticeable, which improves driving comfort, road holding and prevents damage to the engine.
Quality is not just a word we use, it is the defining difference in how GJ BUSH manufactures our products and why our customers think we are one of the most successful suppliers in China. Nanchang Ganjiang Bush Factory is proud to provide premium quality OEM grade auto parts for more than 20 years. Founded in 1998 by Mr.Wang, which has almost 40 years experience on rubber bush design and production, GJ BUSH has worked very hard towards becoming a recognized leader in supplying suspension rubber parts and bimetal bushings.
The application/loading of bushing is different. We must first adjust the rubber hardness, rubber/metal structure and the size of the occupied volume to meet the dynamic/static stiffness required by the customer. Then, make appropriate corrections to achieve the target stiffness and torsion in the main direction, yaw and endurance. The bushing frames is different, including: pure rubber bushings, single-frame bushings, double-frame bushings, three-frame bushings and multi-frame bushings. The pure rubber bushing can be used alone, or it can be used after being pressed into the inner and outer frames. See extra details at https://www.gjbush.com/.